公司动态

做好维修后的跟踪服务,让机器在良好的状态下运行

>> 返 回 <<
发布时间:2013/7/7

       凡事都要脚踏实地去作,不驰于空想,不鹜于虚声,而惟以求真的态度作踏实的工夫。以此态度求学,则真理可明,以此态度作事,则功业可就。
       Down-to-earth to do everything, not chi and dream in, don't seek for the virtual, and but for true attitude for the work of sureness. This attitude to study, the truth can be bright, attitude to work, the winner is.
      当起重机配件出现大问题后,确定需要对其进行大修,我们应该注意排除大修过程中可能出现的安全隐患,如:调整制动器的间隙、更换磨损了的离合器摩擦片和使驾驶室的座椅能够方便地上下调整,车轮组的相关调整。加强驾驶员的劳动保护意识,在进行机器危 险性的实验时,周围应留有足够的空间和防护设施。
       When crane accessories, after the big problem to determine the need to be repair, we should pay attention to rule out overhaul that may arise in the process of safety problems, such as: adjust the brake clearance, replacement of wear of the clutch friction plate and make the bridge seat can be adjusted easily up and down, the wheel set of the related adjustment. To strengthen the driver's labor protection consciousness, when the machine was dangerous sex experiments, should leave enough space around and protection facilities.
  其次,做好大修后的跟踪服务。建立大修工程机械的维修档案,且修理单位应在一定的期限内保证修后的工程机械能达到规 定的使用性能和良好的使用状态。在这一期限内如发生一般故障,经调整后能排除者,应由使用单位自行解决。如由于发生较大的 变化。机件损坏,严重的漏油、漏水、漏气及漏电等必须拆开主要部件进行修理时,则应由送修单位通知修理单位共同进行检查, 及时修复、以减少停机时间,使大修后的机器能尽量保持在良好的状态下工作。
       Second, completes the overhaul after the tracking service. Establish archives for overhaul engineering machinery maintenance and repair unit should be in a certain period of time after repairing engineering mechanical energy to rules governing the use of performance and good used condition. In this period of time such as in the case of an ordinary fault, adjusted to exclude, shall be settled by using the units themselves. If due to the larger change. Parts damaged, fuel oil, water, air leakage and leakage and serious, etc must be broke open the main parts for repair and should be informed by repairing unit repair units to inspect, timely repair, in order to reduce downtime, the overhaul of the machine will try to keep work under good condition.
        山东力王起重机械有限公司为您提供更多物超所值的产品,我们的产品值得您信赖!期待与您的真诚合作!
       Shandong longteng hoisting machinery co., LTD to provide you with more value products, our products are worth your trust! Look forward to working with your sincere cooperation!

下一条: 用创新生产配件,用心服务客户     上一条: 行车配件操作过程中应安全按规章使用
热点新闻:
行车配件——车轮组对行车的作用 (阅读次数:2882 次)
行车配件之环链电动葫芦安装方法 (阅读次数:2652 次)
起重链条的焊接工艺及质量要求 (阅读次数:2600 次)
行车配件维修需要技巧,专业才是关键 (阅读次数:2597 次)
汽车起重机的吊臂伸缩形式简介 (阅读次数:2529 次)
起重机配件双角钢滑轨悬挂装置介绍 (阅读次数:2469 次)
行车配件是不是越贵越好呢? (阅读次数:2457 次)
起重机配件齿轮常小故障解决的方法 (阅读次数:2447 次)
起重机安全问题——保证吊钩的防脱钩装置完好 (阅读次数:2382 次)
起重机采用油漆所考虑的因素 (阅读次数:2277 次)