在各种条件适合的条件下，采用油漆方法会减少生锈给起重机配件带来的损害，山东力王起重机械有限公司如何执行这一措施的呢？
In various conditions suitable conditions, using the paint method can reduce the rust to crane accessories, shandong longteng hoisting machinery co., LTD., how to implement the measures?
起重机配件所采用的油漆和油漆方法，应适用使用地区气候环境条件，油漆及涂装工艺应符合所认可的标准和规范。油漆前应对需涂漆的部位表面进行清洁、除锈处理。油漆涂装应在气温10-32℃范围内进行，但也考虑油漆制造商的油漆使用规范。涂装场地应通风良好，遇到潮湿、尘土飞扬或烈日爆晒等情况应采取措施，否则应停止涂装工作。油漆全部采用无气压力喷涂设备，油膜厚度采用公制的干膜厚度计来测量。油漆使用前进行搅拌，直到油漆全部成份完全混合。如油漆成份有快速沉淀倾向时，经常搅动。当同一种颜色连续涂装时，分层进行，每一层都有足够的对比度，以便鉴定是否全部覆盖。摩擦型联结表面进行喷砂处理，以确保结合面有足够的摩擦系数。承重型联结面或普通螺栓的联结面允许涂漆，其他联结的接合面可不涂漆，但要有防锈措施。
Crane accessories used in paint and paint method, should apply to the use of regional climate conditions, paint and coating process shall be in accordance with accepted standards and norms. Paint surface of the part of the response to be painted before cleaning, derusting processing. Painting shall be carried out in 10-32 ℃ temperature range, but also consider use of paint paint manufacturers. Coating field should be well ventilated, wet and dusty or measures should be taken to situation such as heat and sunlight, otherwise should stop painting work. Paint all adopt pressure airless spraying equipment, oil film thickness using dry film thickness gauge to measure the metric system. Before the paint used for mixing, paint until all ingredients fully mixed. Such as paint ingredients are prone to rapid precipitation, stir frequently. When the same color continuous coating, layered, each level has enough contrast, in order to identify whether all covered. Friction type coupling surface sandblasting, enough to ensure that the joint surface friction coefficient. Bearing heavy coupling surface or ordinary bolt connection allows painting, other coupling joint face don't paint, but must have the rust prevention measures.
|
